website hit counter

Famowood Glaze Coat Tips

In Wood 24 views

I used a product called famowood glaze coat which i had seen some youtube videos on with real nice results. For more tutorials join our facebook group at wwwfacebookgroup.

Famowood Glaze Coat Gloss Oil Based Lacquer Actual Net Contents 1

Unicorn Spit Phoenix Fire Orange Michelle Nicoles Artistic

Epoxy Adhesion Over Stains Epoxyworks

Famowood glaze coat high build epoxy coating is an ultra clear high gloss finish epoxy versatile enough to be used on just about any surface either smooth or rough stained or painted.

Famowood glaze coat tips. Managed to ruin a project time for a re do. Which means if the work pieces not level it will run off or build up at the lowest point. Glaze coat is recommended for indoor use only.

Well as i have been a member for over a year now but as yet havent posted anything i figured it was about time. Pour out equal parts of the 2 part epoxy combine and stir for 6 minutes transfer into a new pail and stir another 6 minutes. Acetone or alcohol before using glaze coat.

It is recommended that you become familiar with glaze coat by doing a small project first. Glaze coat is heat resistant to approximately 120 0f 49 0c after fully cured. Any experience with famowood glaze coat.

Famowood glaze coat is recommended for interior use only and should not be used on hot surfaces such as ash trays or cookware. In this video i show you the in and outs of my favorite two part epoxy famowood glaze coat. Place some type of protection such as coasters or hot pads when placing hot objects on glaze coat surfaces.

Its great for coating tables or bar tops preserving photographs or imbedding decorative items. Before you start to mix make sure the work piece is level. If the surface has been treated with any solvent based liquids such as varnish or stain test a separate area first to ensure compatibility with glaze coat.

I just finished a table top with famowood glaze coat. Glaze coat is a leveling epoxy. Famowood glaze coat is a pour on epoxy coating that can be used on most surfaces rough or smooth stained or painted.

I have a problem. When mixing use equal amounts hardener and resin. I glaze coated a bar top and had to wet sand it down a little bit to remove some surface imperfections.

A short video on how we use glaze coat. The instructions were pretty clear. I did two coats.

The first coat had some areas that did no. Sanding it left the. Stir for three to four minutes.

Required Tools Coverage Surface Preparation Step 1 Measure Step 2 Mix

What Kind Of Resin Should I Use Resin Obsession

Diy Epoxy Countertop How I Transformed This Kitchen Island Into A

Tags: #famowood glaze coat tips

No related post!
Must read×

Top