Yes it will but you have to use the 10 ver of the control panel and the post processor for the shark. Vectric laser post processor january 25 2016.
Playtube Pk Ultimate Video Sharing Website
Copyright Next Wave Automation All Rights Reserved Version October
Newbie Problems On Trumpf Laser Cutting Machine
Dust boot for cnc shark slimline extended bed hd3 hd4 and cnc shark ii.
Cnc shark hd4 laser post processor. There are so few videos of the shark with the laser here on youtube. A lot of information here thanks. 4 responses to cnc shark upgrade.
Ive set up everything according to the new wave documentation when i get down to the final process after selecting the cnc shark hd4 laser post processor the output to machine checkbox is grayed out. You can still use vcarve to layout designs for the laser but you select the laser module post processor instead of the cnc shark processor when exporting the tap file. Laser engraving module for cncs.
2016 239 am. Im trying to use the laser that came with my shark hd4 and im not having much success. These were made using the laser post processor on.
The cnc shark post processors v15 contain the command line necessary to enable use of the output direct to machine option in vcarve pro and aspire. Vectric laser post processor. You use the engraving tool in vcarve for laser cuts.
Figure 7 save toolpaths output direct to machine. Cnc hd4 laser post processor click to download if using windows 10 and edge right click and save as target cnc shark post processors old how to guide 1311 click to download. 4th axis control board for cnc shark.
We have been asked by a lot of people to make a post processor to the vectric software so it can be used with the laser. Download cnc shark inch version here. I am a nube so sorry if this has been answered and i dont see it.
Heres a couple clips for those out there interested in the laser add on. Cncshark usbnewarcsinch vcarve aspire and cut 3d post processor 1132012 click to download. Cutting acrylic with the 28w laser upgrade.
Just wondering if there is a ready made pwm or other type of controller package for a shark type cnc machine that doesnt have to be built from scratch. By jtechphotonicscom on january 25 2016 in uncategorized. Laser conversion kit for cnc sharks.
It seems that the post processors are machine specific i dont have the shark hd4 in my processor list. I made a file and tried it the machine did nothing i tried the gcode inch tap but no go also i bought the laser bundle. Photo vcarve pp for shark hd4.
You ask and you shall receive. Eric hughes july 11. Download cnc shark mm version here.
Cnc Shark Control Panel Installation Instructions Youtube
You Suck At Using A Cnc Router Wired
How To Use Autodesk Fusion 360 For Cnc Milling Make