Oilvarnish mixes such as danish oil enhance grain while laying down a thin film. Tung oil and linseed oil both come from plants.
11 Different Finishes On Walnut The Initial Coat Long But Awesome
Tips For Finishing Cherry Popular Woodworking Magazine
Is A Natural Oil Finish Right For Your Hardwood Floors Macdonald
This depends on what you are looking to achieve though but the fact that tung oil is a completely natural product whereas danish oil is a mixture of different elements including tung oil means that tung oil is.
Boiled linseed oil vs danish oil vs tung oil. What is danish oil. Boiled linseed oil contains drying agents that let it cure overnight but tung oil can take several days. Raw linseed oil can take anywhere from a few weeks to a couple of months to fully dry which is why most linseed oil is boiled.
Tung oil however darkens less with time. Boiled linseed being more concentrated it will have a deeper darker hue. Linseed oil is a popular wood finishing option.
Boiled linseed oil vs tung oil. So to answer your question the boiled linseed would have a richer finish. In fact many of its supporters will argue that it is the best.
When specifically comparing tung oil vs linseed oil each has their own pros and cons. Raw linseed oil cures much slower weeks at a minimum so raw linseed oil will remain sticky for a long time even with the excess wiped off. Tung oil is pressed from the seeds contained within the nut of the tung tree while linseed is derived from ripe flax seeds.
Tung oil is more water resistant but takes a long time to dry and requires many coats. The approximate ratio is 11. Watco danish oil and tung oil are two common forms of wood finishing oil each with their own unique drawbacks and benefits.
If linseed is the base of said danish oil then there would be very little difference outside of danish oil drying to a harder more polymerized surface. This is really just a thinned varnish just like the stuff sold as wiping varnish. Danish oil vs tung oil most people prefer to use tung oil over danish oil because of the superior coloured finish that it produces.
Given its many advantages it is safe to say that tung oil is a better choice in refinishing than linseed or danish oil and polyurethane. Although the other choices have their own advantages tung oil is the only natural finish that can give the best results among them. Velvit oil watco danish oil mccloskey tung oil finish contains pure tung oil not linseed oil the second tung oil finish is one made from varnish and mineral spirits.
Danish oil and linseed oil are two popular oil finishes but it can be difficult to tell which one is the best without trying them out. Danish oil is made with linseed oil and either turpentine or mineral spirits making it a poor choice for surfaces that will be in contact with food products. Linseed oil on the other hand dries more quickly and applies very easily but wont give much protection from water.
Some finishes with tung oil in their name contain little or no real tung oil as an ingredient. Boiled linseed oil cures faster than tung oil overnight in a warm room when all the excess is wiped off as opposed to two or three days for tung oil.
Tung Oil Wikipedia
How Does Walnut Oil Compare With Boiled Linseed Oil And Tung Oil
Tung Oil Debunking The Myths Canadian Woodworking Magazine