website hit counter

Beeswax Over Tung Oil

In Wood 28 views

The best tung oil wood finish. Ben light shows us how to finish raw wood using tung oil and wax.

Two Food Safe Wood Finishes You Need Right Now

100 Pure Tung Oil Wood Finish Protection Non Toxic Wood Oil

Our Favorite Food Safe Wood Finish How To Finish Butcher Block

So it depends what look you want.

Beeswax over tung oil. This polish can be used directly on bare wood over painted surfaces over polyurethane shellac or lacquer. Didnt use pure tung oil though but a product called tru oil i. Wax over tung oil.

Typical of this group is watco both the oldest and best selling. Tung oil and wax. Step 8 repeat steps 6 and 7 as many times as you like.

Just look at that wood grain. In almost all cases they contain minimal or zero tung oilits just marketing. See full post with more tips links and resources on the apa.

You can put wax on just about anything but on your project it will bring the mirror finish down to a more satin sheen. Step 7 let wax dry for 5 to 20 minutes then buff out the wax with a clean rag. The tung oil by itself would be a good finish you can always put a wax over the tung oil to give it more shine however wax is not a strong or tuff finish and doesnt last long at all i have never put tung oil over this minwax finish so im not really sure but i think you can if you go over to the lee valley site there is info on how to use it.

Danish oil often lumped in as an oil finish is actually a thin oil and varnish mixture. Rub the wax all over the piece. Can i use wax over it.

There is a 41 mix of 100 tung oil and natural beeswax. This tung oil polish is not a tung oil finish that mimics tung oils properties or feel this is real tung oil mixed with natural beeswax. When tung oil is used on interior finishes it provides a classic natural hand rubbed look that is further enhanced by the application of a paste wax all natural beeswax paste or liquid wax which will increase wood depth and surface protection.

So let it cure. A wax coating will slow this process. Im in the process of making 1911 wood grips and used tung oil on some koa and it just didnt look shiny enough.

I finished a pistol grip this way and its as new today after 15 years of shooting. Tung oil cures in two three days but it takes over 3 4 weeks to cure completely. Step 6 with a clean rag apply the wax.

Dont be fooled by products that use the words tung oil followed by finish. I use the wax over tung oil waterlox original but that is when i dont take it to high gloss. I looked for wax finish on the search here but there was just way too many topics and i didnt want to go through all 2000 topics lookingany suggestions on.

The oil helps bring out woods beauty while the varnish resin offers somewhat more protection against chemicals heat scratches and stains than either oil or wax. Tung oil is a viable finish including the application of waxafter it is fully cured which can be a long time if it is real tung oil. Or do i need to strip it down.

After about a month id say its safe to put wax on it. I typically do this 3 times.

Wood Finishes What Works When The Wood Database

Tung Oil Finish To Wax Or Not To Wax Bladeforums Com

Refinishing Your M1 Garand Stock

Tags: #beeswax over tung oil

No related post!
Must read×

Top